|
|
KA4615 |
Dispense Valve
Air-Operated |
|
- Rated for 3000 p.s.i.
- 100 : 1 pilot to system ratio
- Minimum air pilot pressure is 50 p.s.i. with grease pressure of 3000.
- IN to ports A and B closed when neither two way valve is pilot operated.
- 1/8" NPT air and 1/4" NPT grease ports
|
The KA4615 Dispense valve assembly consists of two 2-way valves in one body for selector service.
It is air-pilot operated with IN, Out A, and Out B ports, spring biased to all ports closed.
The material ports are 1/4 NPTF, the air pilot ports are 1/8 NPTF. The valves have an
approximately. 1/8 inch internal orifice & the IN port is capable of sealing high pressure.
It will not effectively block reverse flow (OUT to IN flow direction). This valve is an excellent choice
when grese flow must be diverted between two nozzles, for sampling, or for purging. The "Cartridge" type
valve bodies are removable for servicing, without removing the block, or grease plumbing.
Sales Drawing and Schematic Symbol (PDF)
|
Many pages and documents on the G.P. Reeves web
site are stored in Adobe Acrobat® PDF format. This is for our customers'
convenience in reading, printing and saving the information, however you
must have the Adobe Reader® software installed on your computer to make
it all work. If you do not have Adobe Reader® , you may use the link
below to download a FREE copy directly from Adobe.
Download Adobe Reader |
|
Home Page
|
(c) 2005-2006 G.P. Reeves Inc.
Send Comments or questions to Lubelogic@gpreeves.com.
|
|
