Model Number
GDC3001 |
Grease Dispenser
With Confirmation |
RELIABLE, PLC COMPATIBLE, PROVES GREASE FLOW
Air-operated single-acting metered shot dispenser
|
- Accurate repetitive dispensing of .2 to 4 cubic centimeters of grease
- Dispenses up to 15 shots per minute at maximum shot size
- Dispenses up to 30 shots per minute at minimum shot size
- Base mounted components
- Operates with unregulated grease pressure (3,000 p.s.i. max.)
|
- AC/DC or PNP Flow Sensor confirms grease fill and discharge
- Output to PLC to confirm operation & grease flow
- Snuffer action prevents dripping
- Large 4 cubic centimeter maximum shot size
- Functions with almost any grease
|
|
RELIABLE AND SIMPLE
The GDC3001 grease dispenser uses an air operated spool valve that directs grease to either side of a floating piston.
Shot size can be easily changed by lengthening or shortening the piston stroke.
CLEAN AND ECONOMICAL
The maximum 3,000 p.s.i. grease working pressure of the GDC3001 dispenser allows it to function without a grease pressure regulator.
Its internal snuffer action pulls back a small amount of grease after dispensing.
|
GDC3001 SPECIFICATIONS |
| Material Dispensed |
Lubricating oil and grease compatible with neoprene seals and with a viscosity between 30 and 1,000,000 centipoise. |
Adjustment Mechanism |
Includes locking nut and has five complete revolutions
between maximum and minimum
|
| Pressure Drop |
Grease output pressure will be 80% of grease inlet pressure. |
Air Valve Size and Function |
3-way normally closed, with 1/8 or 1/4 NPT ports |
| Minimum Air Pressure |
40 p.s.i. |
Material Inlet Port |
1/8 NPT female on base |
| Compressed Air Inlet Port |
1/8 NPT female located on the dispense valve |
Ambient Temperature |
50 to 120º F. (10 to 49º C.) |
| Manifold or Base |
Included |
Shot Volume |
.2 to 4 cc (.012 to .24 cubic inch) |
| Material Inlet Pressure |
3,000 p.s.i. maximum, 400 p.s.i. minimum
|
Sensor Supply Voltage |
20 to 250V AC/DC |
| Material Outlet Port |
1/8 NPT female on base
|
Switching |
PNP, NPN |
| Switch Load Capacity |
50 - 400 mA
|
Switch Output |
ON when flow rate is below the set point |
* Shipping Weight
7 lb. (.45 Kg.)
See Sales Drawing (PDF)
See Flow Sensor Information
Download Brochure with drawings
|
|
|
|
Site Search
|
